5cm long cuttable pixel LED strip. WS2812 with 10 addressable RGB, very flexible and able to be cut at every led die for maximum versatility. The strips are 3.5mm wide and 5cm long running at 5v max smd 2020 IP30 non-waterproof led dies on a black flexible PCB. comes with a 3 pin micro jst connnector.
You can solder more of these strips together by cutting and soldering-use a fine solder tip. Please note that the data line is at one side and not the center pin as on typical led strips. Recommended to use at least a 330 ohm resistor on the data line.
Great for inlaying into a chassis, hiding beneath wire mesh or inside a control box.
Prior to ordering please familiarize yourself with the shipping policies here.